ILoveToCreate Patriotic Flip-Flops!


ILoveToCreate
Patriotic Flip-Flops
Copyright Margot Potter
"Mom crafted, kid approved."

Who doesn't like to feel patriotic without feeling like a dork? Teens, that's who! I'm a fan of seasonal accessories as long as you don't start too look like someone on The People of WalMart blog. It's a fine line, people. These festive flip-flops are the perfect combination of '4th of July festive' and 'fashionista friendly.' They can be modified to suit the rest of the summer months with a little color change, so don't feel like they're only good for one day. Though for me, being patriotic isn't a one day event. Your teens will have a blast making these. Avalon pounced on them before the glue was even dry. I guess I'll have to make my own pair before the holiday!



Materials
Rubber Flip-Flops (I got my classic pair at Target)
3/10" wide navy blue ribbon with white stitching
1/4" wide dark red rick rack trim
2" wooden craft stars
2 silver-plated head pins or 20 gauge silver-plated craft wire
Aleene's Liquid Fusion Glue
Aleene's Jewelry and Metal Glue
Tulip Fashion Graffiti Big Phat fabric marker blue
Crafty Chica Little Chica Paint Pack paint white
8492-L Dawn Hauser Star rubber stamp from Inkadinkado
Elasticity clear stretch elastic cord

Tools
Brayer
Round nose pliers
Flush cutters
Non stick craft sheet
Electric drill with 1/16" bit



1. Use fabric marker to color star top and sides blue. Allow to dry.



2. Use brayer or foam applicator to spread paint on a non-stick sheet or directly on surface of stamp. Test print. Stamp on the stars. Allow to dry.


3. Glue blue ribbon trim to center of flip flop straps, starting at the bottom of the strap, tucking the ribbon into the space at the bottom and working your way to the center. It doesn't have to be pretty, the stars will cover it.


4. Glue rick-rack trim to center of blue ribbon again starting at the bottom of each strap, tucking the ribbon in and working to the front. Allow to dry.

5. Drill a hole in the center of each star.

6. Wrap rick rack trim around three times to create a 1 3/4" ribbon shape. There should be two loops on each ribbon.



7. Make a large loop at the top of a head pin, thread the center of your ribbon into the loop and secure it with the chain nose pliers. Thread this into the center of the star.


8. Use round nose pliers to create a loop flush to the back of each star, cut off excess wire before looping. The wire should be approximately 1/4" long before you grasp it with your round nose pliers at the end and wrap it around the jaw creating a round loop. Make sure the loop is secured closed.

9. Thread a 2.5" segment of Elasticity into the loop at the back of the star and around the front end of one side of the strap on your flip-flop. Tie it into a double knot (follow link for image.) Dab the knot with some jeweler's glue. Repeat for the other side of the same strap to secure the star. Repeat for second flip flop. Allow glue to dry before wearing flip-flops.

1 comment:

CraftCrave said...

Just a quick note to let you know that a link to this post will be placed on CraftCrave today [30 Jun 12:00pm GMT]. Thanks, Maria